KB120120
Sensor capacitive, M12x1 60long, Flush, Sn: 0-6, 10-35V DC, PNP NO, Connector M12 3pin, IP67, V2A, LED, Manual adjustment including Nut, Screwdriver
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Capacitive sensors - Norm switching distance
Capacitive proximity switches are contact-free sensors. They detect metallic and non-metallic objects, regardless of whether they move or not. The achievable sensing range of the devices depends on the object material, its dimensions and the response sensitivity, which is set via a potentiometer. The vibration-resistant sensors can be approached laterally or frontally. Capacitive proximity switches are used for presence detection (e.g. sealing detection), positioning (e.g. PET bottles), counting (e.g. plastic caps), level detection (e.g. lubricant) or distance measurements (e.g. thickness measurement) of solid and liquid materials.
Data sheet
- Type of switching function
- Normally open contact (NO)
- Type of electrical connection
- Connector M12
- Type of switching output
- PNP
- Rated switching current
- 250mA
- Setting procedure
- Potentiometer
- Relative hysteresis
- 15%
- Correction factor (glass)
- 0.6
- Correction factor (wood)
- 0.6
- Correction factor (oil)
- 0.5
- Correction factor (PVC)
- 0.5
- Short-circuit protection
- Yes
- No-load current
- 15mA
- Number of pins
- 3
- Switching distance
- 0 - 6mm
- Switching frequency
- 500Hz
- Voltage drop
- 2V
- Reverse polarity protection
- Yes
- Operating voltage (DC)
- 10 - 35V
- Output functions
- Switching point
- Display
- LED
- Design
- Cylinder, screw-thread
- Thread length
- 40mm
- Thread pitch
- 1mm
- Length
- 60mm
- Mechanical mounting condition for sensor
- flush
- Degree of protection (IP)
- IP67
- Active area material of sensor
- Plastic (PTFE)
- Housing material
- Stainless steel (V2A)
- Thread dimension
- M12
- Ambient temperature
- -25 - 70°C
- Level detection
- Yes